AC/DC power supply shifting
Operating manual of compressor liquid crystal plate
Operating manual of compressor liquid crystal
7
OPERATING INSTRUCTIONS
This machine is AC/DC double use air compressor, the battery
wrap and AC power supply all can supply power for machine, can
shift the power supply through double open switch, when double
open switch at "O" position means cut off power supply, when
press down the "I" means use the battery wrap supply power,
when press down "II" means supply power for machine through
AC power supply supply (Shown as picture 2)
The battery wrap and AC power are separated independent
power supply, not charging the battery wrap when use AC
power supply, the battery wrap need use charger independent
charging.
After plug the power supply, the liquid crystal screen
of operating panel will lighting, the machine will has
5s system measure time, the liquid crystal screen
indicate effect(shown as picture 3). When the liquid
crystal set pressure indicate "---" indicate the effect
means machine enter into power on but close
machine status, can operate the operate panel after
enter into close machine status.(Shown as picture 4)
Press on operating panel: "ON/OFF" key start machine, can increase set pressure through press
the "
"key on the operating panel after
start machine, each one time press increase 0.05MPa,
when set pressure smaller or equal 0.3MPa, each one time press increase 0.02MPa. Reduce the
set pressure through press the " " key on the operating panel. The machine will automatically
stop after the air supply pressure value achieve set pressure value, the machine will automati-
cally start when the air supply pressure value lower than 10% of set pressure value after air
ventilate, short time not use or occur failure can press the "ON/OFF" key on the operating panel
to close the machine
The liquid crystal screen indicate effect (shown as picture 3). This machine has mute and high
speed two modes, can press "Mute/high speed" button circle shifting mode
Summary of Contents for ACDC
Page 9: ...9 EXPLODED VIEW...
Page 10: ...10 PARTS LIST...