Stealth ACDC, Operator'S Manual

8

OPERATING INSTRUCTIONS

Will occur failure code at the liquid crystal screen set 

pressure value position when machine abnormal stop 

machine (Shown as picture 5) 

E01-----------Voltage lower than 16V 

(The machine can't start when voltage of battery wrap lower 

than 16V, need charging) 

E16----------Drive plate power module over heat protection 

(It will occur when machine long time continue working, the 

machine unable to start during the protection period, it will 

automatically recover when temperature reduce under about 

30s of common temperature environment) 

This machine has mute and high speed modes, can press "Mute/high speed" button circle 

shifting mode, high speed mode fast supply air, mute mode small noise. 

MAINTENANCE

1.   Please keep machine clean, should fix time process washing maintenance for machine.  
2.   Completely exhaust the dirty water in the gas storage vessel, at least one time per week, the 
      pressure in the gas storage vessel when exhaust dirt water should smaller than 0.1MPa.
3.   Frequently check whether safety valve sensitivity, safety valve able to air ventilate easily 
4.   Each use 100 hours, please disassemble the filter core of this muffle to clean or renewal, 
      renewal skin bowl each use 500 hours, the liquid crystal screen will indicate running time. 

TROUBLESHOOTING