background image

4

.

WARNING

This product can expose you to chemicals including lead, which is known to the State of 

Californiato cause cancer, birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

WARNING:

SAFETY INFORMATION

DO NOT OPERATE THIS UNIT UNTIL YOU READ AND UNDERSTAND THIS

INSTRUCTION MANUAL FOR SAFETY, OPERATION, AND MAINTENANCE

INSTRUCTIONS.

Risk of fire caused by sparks from motor and pressure switch could result in death or serious injury. 

Do not operate compressor near flammable gas or vapor. Never store flammable liquids or gas es 

in vicinity of compressor.
High pressure air could result in death or serious injury.

Hot compressors surfaces could result in serious injury. Allow compressor to cool before touching.

Inhalation hazard. Using compressor to supply breathing air could result in death or serious injury.
Do not use compressor to supply breathing air.
Risk of fire could result in death or serious injury.

Risk of serious eye injury. Always wear ANSI Z87.1 approved safety goggles when using air 

compressor.Do not spray any part of the body.
Shock risk could result in death or serious injury. Only connect compressor to a properly grounded 

receptacle. KEEP CHILDREN AWAY FROM THE AIR COMPRESSOR AT ALL TIMES.
Dust can be created when cutting, sanding, drilling or grinding materials such as wood, paint, 

metal, concrete, cement, or other masonry. To reduce your exposure to these chemicals, work in a 

well ventilated area and ALWAYS wear approved safety equipment.

Never operate above maximum operating pressure of the spray gun or tool. Drain water from 

tank after each use. Do not weld or repair tank.
Do not operate with pressure switch or safety valve set above maximum allowable working 

pressure.

Do not spray flammable materials in vicinity of any flame or ignition sources including the 

compressor unit.
Do not restrict compressor ventilation openings or place objects against or on top of 

compressor.Operate compressor only in a clean, dry, well ventilated area.
Do not operate unattended. Always turn off and unplug unit when not in use.

• 

• 

• 

• 

• 

Summary of Contents for SAQ-1413
















Reviews: