Stealth SAQ-1413, Operator'S Manual

9

OPERATING INSTRUCTIONS

Fig J

2

Fig K

1

OFF

ON

Fig L

1

3

2

Before each start-up

1.Set the ON/OFF switch (1) to the OFF position (Fig H).

2.Turn the air pressure regulator knob (1) counter-clockwise until it stops (Fig I).

3.Attach hose and accessories (Fig J).(Hose and accessories need to be purchased

How to start

How to shut down

Moving the Air Compressor

separately.)

5.

Close the tank drain valve (Fig K).
Plug-in the power cord (2) (Fig K).
Set the ON/OFF switch to the ON position and allow the tank pressure 

to build. Motor will stop when tank pressure reaches cut-out pressure.
Turn the air pressure regulator knob clockwise until desired pressure is 

reached.
The compressor is ready for use.

Set the ON/OFF switch (1) to the OFF position.
Unplug the power cord (2).
Reduce the pressure in the tank through the outlet hose. Pulling the 

safety valve ring (3) and keeping it open will also reduce the pressure in 

the tank (Fig L).
Set the tank drain valve (1) to ON to ensire tank is drained (Fig K).

2.
3.

4.

1.

4.

3.

2.

1.

Fig H

OFF

1

Fig I

1

CAUTION:To avoid personal injury, DO NOT grab only the sliding 

handle (1) to lift the whole unit. If you want to lift the unit, please make 

sure you grab both the tank and sliding handle (1). Use the following 

instructions to use the sliding handle (1) and wheels to move the unit 

(Fig M).

a.Unlock the two cam locks (2) as shown in the illustration.

b.Slide the handle (1) upward to the desired height.

c. Lock the two cam locks (2) in place.

Lock

Unlock

1

2

Fig M