13 |
P a g e
REV 03/2012
After connecting the hot and cold water,
rotate the temperature knob, in accordance
with the temperature scale in the dial, you
can adjust the different temperature, rotate
the middle knob, this shuts the water on
and off. Rotate the water diverter function
knob; you can use the different shower
functions.
The thermostatic valve faucets are different
with the general faucet, when using the
thermostatic valve faucet, the desired results
can only be achieved after the following
terms and conditions are available.
The water pressure of the hot and cold water
should remain consistent
If a relatively large water heater has been
equipped, the heat required should be
satisfied
Specific methods of operation
Thermostat valve adjustment
o
If the temperature control faucet has
been equipped in the steam room, a sudden change of water temperature
which may leads to burn the body by hot water, or stimulate the skin by cold
water will be eliminated, the function is controlled by the Italian thermostat
valve-core which uses the advance shape alloy memory technology (SAM) to
control the water temperature. On thermostat adjusting hand wheel, the 30°-
50° temperatures are marked there, the temperature within the scope are
optional for the users. If the user rotates the wheel at 38°, it will be locked,
and the water will always flow at 38°. If the user wants to change the
temperature, he/she can press the position lock bar on the thermostat
adjusting hand wheel, and then adjust the temperature to the desired value.
Note: the temperature setting of the hot water tank and the cold water will vary the
temperature valves on the control. Seasonal temperature change will affect the
temperature also.
