14 |
P a g e
Rev 10/2012
DESCRIPTION OF FUNCTIONS
Not in the same order above
1.
ON/OFF Key
Under ON state, press “ON/OFF” Key on the panel to start the system, and the top light is turned on, all functions are
activated on the panel, the back light is on, LCD shows the ambient temperature and all icons are lit; press the “ON/OFF” to
shut off the system.
Press other keys except “ON/OFF” key under standby and OFF state, the backlight will come on, if the systems is not turned
on, the backlight will be turned off in 30 seconds.
Following functions are available when the system is on:
2.
Circulation Fan:
Press
key on the panel to start the fan the icon will light up on the LCD screen. Pressing the fan key again, will shut
down the circulation fan. This function circulates the steam throughout the enclosed shower space. No special exhaust
needed for this function.
3.
Steam Temperature and Time Setting:
Press TIME & TEMPERATURE key on the panel so that temperature icon is on the screen, system will enter into steam
temperature setting state. Press “+” or “-“key to increase or decrease temperature. The temperature range is 25-60°C (77-
140°F); press this key again to enter into time setting state. The time range is 1-99 minutes. If time or temperature is not
adjusted within 5 seconds, the system will automatically recover to display room temperature.
4.
Steam:
Press
key on the panel. The default steam time is 45 minutes, and the highest temperature is 45°C (113°F). By
pressing the steam key again, the steam system will shut off.
5.
CD/FM Function:
Press
key on the control panel or remote to activate the FM Radio, the corresponding icon will light up on the control
panel. The system will automatically switch to the previous frequency. Pressing this key the second time, will switch the
function to CD mode. The display will show the corresponding icon. Pressing the
again will shut off the system.
6.
Volume Adjustment:
When the speaker is ON, pressing the “+” or “-“on the key panel to increase or decrease the volume. When changing the
volume, the LCD monitor will display the corresponding changes.
7.
Frequency or Channel Adjustment:
When the radio is ON, press the “TUN” key to adjust the frequency (radio channels). Pressing the “+” or “-“ button once, will
increase or decrease the frequency by 0.1MHz, holding it for 1 minute will automatically search channels. The search will stop
once the next station is found, and the LCD panel will display the corresponding channel. When the system displays channel,
press “+” or “-“key to adjust channels, the range is 1-25 channels.
8.
MEM, HZ, CH Selection Key:
When radio in ON, press “MEM” key to select radio frequency (H) or channel (CH). Hold this key to store the correct
frequency into channel, LCD display will show “MEM” when stored.
9.
Telephone Function (Operational only when is plugged in or available):
When there is an incoming call, telephone will ring, system will automatically shut off the radio/CD. Press
key on the
panel to stop the ring and receive the phone call. LCD display will show the telephone icon; also, the shower functions will
automatically shut off. Press phone key again to end the call. (You cannot dial out)
10.
Mood Light:
Top light will turn on when the system is activated. Press the Light key on the panel or remote control to turn on or turn off
the mood light.
