Quick Storage
1.
Step the pedal switch to off the power.
2.
Unplug the Power Cord.
3.
Make the unit cool for 40 minutes.
4.
Remove the clothes hanger and hanger hook from pole, and remove the ironing
board and the telescopic pole.
5.
Tilt the unit or invert it, unscrew the bottom drain plug to drain away the
remaining water. As figure 28 shows. It
’s better to loosen the safety cap before
unscrew drain device, which is easy way to drain water fully clean. Screw the
safety cap and the drain plug before storage.
CAUTION: DON'T SCREW THE SAFETY CAP WHEN BOILER IS HOT,
THERE IS HOT STEAM AND HOT WATER REMAINS IN BOILER, WILL
BURNS WITH HOT STEAM.
6.
Put the unit to a convenient storage location.
Cleaning and Long Term Storage
We recommend you follow this procedure at least once a month. Use of
distilled or
de-mineralized water
reduces cleaning and prolongs the life of your pressurized
steamer.
1.
Step the pedal switch to off the power.
2.
Unplug the unit from the power outlet.
3.
Wait for the unit to cool completely (at least 40 minutes).
4.
Remove the Telescopic Pole and others from the unit,
and put them aside.
5.
Mix a solution of 50% vinegar and 50% water. In most cases, 1000ml of this
solution will be sufficient,
6.
Unscrew the safety cap, and filling the water-vinegar solution 1000ml to the
boiler wait for 30 minutes. Then Carry the unit to a sink or tub.
7.
Unscrew the bottom drain plug and drain out remaining water in the boiler, and
then Rinse the boiler with fresh water. Tilt or upside downs the unit to remove of
the water.
8.
Flush the boiler
with fresh water until no vinegar smell.
9.
Re-screw safety cap and drain plug, Reattach the Telescopic Pole and hook
hanger and nozzle
.
Wipe the outside of the appliance with a wet cloth
10.
If the unit surface is dirty, we recommend to use a dry cotton cloth or with some
30% alcohol solution to cleaning.
TO PROLONG SERVIE LIFE OF THE STEAMER, WE SUGGEST YOU TO
CLEAN THE UNIT FREQUENTLY.
Figure 18
