69
www.steamax.com
STEAMAX H-PRIV 2 – SELECTION & OPERATING OF THE MENUS
TCR values for different materials
Please note:
In temperature controlled modes, the device will adjust the output power automatically depending
on the selected temperature. The value you set determines, which power the device starts to fire with. It is a kind of
preheat function as well.
Finally, in TC modes, adjust the TCR (temperature coefficient of resistance) fitting exactly the applied coil, whereby
the temperature control is more accurate.
Note
1. The TCR value in the table is multiplied by 10
5
in the current TCR.
2. The TCR value range is between 1 and 1000.
Nickel (Ni)
400 – 800
200 – 500
10 – 300
Stainless Steel (SS)
Titan (Ti)
Material
TCR Value Range
