49
www.steamax.com
STEAMAX REULEAUX RX300
–
OPERATING & CHANGING THE VAPING MODES
Note
1. This function should only be used at room temperature, to ensure that the correct “base resistance” is locked.
2. When you remove the coil and then put it back while in resistance lock mode, the device can maintain the same “base
resistance” although the coil resistance may increase due to the rise of temperature. When you remove the coil and
then put a coil back while in resistance unlock mode, the screen may display ”NEW COIL RIGHT, SAME COIL LEFT”. If it is
the same coil, press the left adjustment button and if it is a new coil, press the right adjustment button. When changing
atomizer heads, be sure to unlock the resistance so the base resistance matches the new coil.
3. If you accidentally use a conventional coil or coils with a resistance greater than 1.5 ohms in TC-Ni, TC-Ti, TC-SS or
TCR (M1, M2, M3) modes, the device will automatically switch to VW Mode.