12 | ENGLISH
Using Your
3-in-1 Steam Mop
FABRIC STEAMING
CAUTION: When steaming any material for the first time, it is recommended that you test on a
small inconspicuous area before proceeding. Do not use on synthetic fabrics, velvet, or other
steam-sensitive materials.
• Make sure Fabric Nozzle is properly connected. Refer to Page 9 for details.
• For general steaming convenience, Extension Pole should be removed so that unit functions as a hand-
held fabric steamer.
• Follow General Operating Instructions on Page 11 to begin steaming.
• For fabrics and linens, direct Fabric Nozzle towards material you wish to steam, and keep the flow of
steam focused there. Using a slight back-and-forth motion over the area you are steaming will further
enhance the steaming process.
• For garments:
- Hang garment from a clean, rust-free hanger.
- Direct Fabric Nozzle towards bottom of garment. Steam will rise along inside and outside of material,
removing wrinkles. Slowly slide Fabric Nozzle upward from bottom to top of garment.
- Direct Fabric Nozzle away from garment and smooth material with your free hand.
- Repeat as necessary until garment is fresh and wrinkle-free.
• General steaming tips:
- Curtains and draperies can be steamed while still hanging.
- To remove wrinkles from towels, handkerchiefs and napkins, drape them over a rod or towel rack and
gently steam them.
- Heavier fabrics may require repeated steaming to achieve desired results.
- To remove exceptionally stubborn wrinkles, steam both sides of fabric.
- Be especially careful when steaming any delicate fabrics that may be damaged by water spotting.
STEAM CLEANING
CAUTION: When steaming any surface for the first time, it is recommended that you test on a
small inconspicuous area before proceeding. Do not use on leather, wax, polished furniture and
floors, or other delicate, steam-sensitive surfaces.
•
Make sure desired cleaning accessories are properly connected. Refer to Pages 8 & 9 for details.
•
For general cleaning convenience, Extension Pole should be removed so that unit functions as a hand-
held steam cleaner.
•
Follow General Operating Instructions on Page 11 to begin steaming.
•
Direct Jet Nozzle towards surface you wish to steam. Use a slight back-and-forth motion over area
to enhance the cleaning process. To sanitize surfaces, hold Jet Nozzle approximately 1/2 inch from
surface for at least 5 seconds. This will most effectively kill germs and bacteria.
•
When using Squeegee, start by thoroughly steaming entire window or mirror, then turn steam off. Next,
press Squeegee to top of window or mirror, and pull slowly downward. Move slowly from one side of
the surface to the other in this fashion until entire surface is clean.
•
Wipe steamed areas with a clean cloth to remove loosened dirt and grime. Wiping the area while it is
still wet is recommended, but use caution when wiping surfaces such as metal that may still be hot.
