8 | ENGLISH
STEAM CLEANER SETUP
JET NOZZLE
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1.
Align Jet Nozzle with Steam Nozzle as shown (FIGURE 4).
2.
Slide Jet Nozzle into Steam Nozzle, pressing firmly until release button snaps through hole.
3.
To remove Jet Nozzle, press firmly on release button while simultaneously pulling Jet Nozzle
away from Steam Nozzle.
UTILITY BRUSHES
CAUTION: Metal tip of Jet Nozzle becomes hot during use. Always allow unit to cool
before connecting/disconnecting any accessories.
1.
Align Utility Brush by lining up the ridge on the inside of the Brush with the groove on Jet
Nozzle as shown (FIGURE 5), and press it firmly on as far as it will go.
STEAM
NOZZLE
JET
NOZZLE
Assembling Your
3-in-1 Steam Mop
FIGURE 4
FIGURE 5
RELEASE
BUTTON
HOLE
RIDGE GROOVE