ENGLISH | 7
CONNECTING POLE TOP
1.
Look at underside of Pole Top, and locate two guide tabs
(FIGURE 3-A).
2.
Align Pole Top guide tabs with guide grooves on SECTION 1
of Telescopic Pole. Be sure to orient Pole Top so that Steam
Nozzle Cradle faces toward front of unit. This will help to
improve unit stability when heavy garments are hung from
the Clothes Hanger Hook.
3.
Slide Pole Top onto SECTION 1 of Telescopic Pole
(FIGURE 3-B). Press down firmly until Pole Top fits
securely in place.
When not in use, hang the Steam Nozzle on the Pole Top’s
specially designed Steam Nozzle Cradle.
CAUTION: To prevent steam from causing bodily injury or
damage to surfaces, always hang Steam Nozzle on Steam
Nozzle Cradle when not in use. Do not lay Hose on the floor
as condensation may build up, causing unwanted water
droplets in the steam. Do not pull on the Hose with excessive
force as this may damage it, resulting in a steam leak.
ADJUSTING TELESCOPIC POLE
In order to adjust the length of SECTIONS 1, 2 & 3 of the
Telescopic Pole:
1.
Release extension lock directly below SECTION 1 by
swinging hinge outward as shown. SECTION 1 can then
be extended / retracted (FIGURE 4).
2.
Once SECTION 1 is at desired length, close hinge to
once again secure extension lock.
3.
Repeat
STEPS 1 & 2
for SECTIONS 2 & 3 of the
Telescopic Pole, using the extension lock directly below
each of those sections.
NOTE: It is recommended to extend Telescopic Pole
to its full height during steamer operation; this will
ensure optimal steam flow through the Hose.
FIGURE 3
3-A
3-B
FIGURE 4
