8 | ENGLISH
CONNECTING FABRIC BRUSH & LINT REMOVER
The Fabric Brush or Lint Remover may optionally be connected to the Steam Nozzle if you wish
to brush away lint, loose threads or other particles from your fabrics.
1.
Make sure Steam Trigger is released, and that Steam Nozzle is not emitting any steam.
CAUTION: Do not try to connect Fabric Brush or Lint Remover while unit is emitting
steam, as this can cause burns and injury.
2.
Align long peg on back of Fabric Brush or Lint Remover (FIGURE 5-A) with corresponding slot
on face of Steam Nozzle (FIGURE 5-B).
NOTE: Lint Remover should be oriented so that round opening aligns over steam holes
on face of Steam Nozzle.
3.
Press Fabric Brush or Lint Remover firmly onto Steam Nozzle, until it fits snugly and firmly in
place.
Your new SF-420 Contemporary Fabric Steamer is now fully assembled and ready for use.
Please continue reading this manual for instructions on using the Contemporary Fabric Steamer,
as well as directions for proper cleaning, storage and troubleshooting.
Assembling Your
Contemporary Fabric Steamer
FIGURE 5
5-A
5-B
