Top Innovations, Inc.
F
ABRIC
S
TEAMER
& I
RON
P
RODUCT
I
NFORMATION
5
The following features and accessories are included with your Fabric Steamer & Iron. Carefully
inspect Styrofoam packing material for all parts listed below. To obtain possible missing parts, refer
to the
Customer Support
section on page 14 of this manual.
U
NIT
F
EATURES
& A
CCESSORIES
1.
W
ALL
-M
OUNTING
B
ASE
2.
B
ASE
U
NIT
3.
W
ATER
R
ESERVOIR
F
ILL
H
OLE
4.
W
ATER
R
ESERVOIR
C
AP
5.
W
ATER
L
EVEL
W
INDOWS
6.
L
IGHTED
O
N
/O
FF
S
WITCH
7.
S
TEAM
N
OZZLE
H
ANGER
8.
S
TEAM
N
OZZLE
9.
H
EATING
I
NDICATOR
L
IGHT
10.
S
TEAM
B
UTTON
11.
H
ANDLE
12.
I
RONING
P
LATE
13.
S
TEAM
H
OSE
14.
F
ABRIC
B
RUSH
15.
M
EASURING
C
UP
12
Top Innovations, Inc.
U
SING THE
F
ABRIC
S
TEAMER
& I
RON
STEAMING GARMENTS
1.
Place garment on a clean, rust-free clothes hanger. Hang within easy reach of Steam
Hose / Nozzle.
2.
Point Steam Nozzle at bottom of garment. Steam will rise along inside and outside of
fabric, removing wrinkles. Slowly slide Steam Nozzle vertically, from bottom to top of
garment.
NOTE: Do not allow kinks to form in hose at any time during use.
3.
Direct Steam Nozzle away from garment and smooth fabric with your free hand.
4.
Repeat steps 3 and 4 as necessary until fabric is smooth and wrinkle free.
USING THE IRONING PLATE
Whenever a crisp crease is desired, this can be easily accomplished using the Ironing Plate.
A folded towel placed on a table-top or other flat surface may be used if an ironing board
is not conveniently available.
1.
Be sure Fabric Brush has been removed before proceeding.
CAUTION: Use care when removing Fabric Brush from Ironing Plate, as both may be
hot and may cause burns or other injury
.
2.
If the unit has not recently been in use, allow Ironing Plate at least 45 seconds to heat
up.
3.
To form a crease, fold fabric and apply Iron Plate as you would use a regular iron. If a
steam burst is desired, simply press Steam Button.
When you are finished using the Fabric Steamer & Iron, immediately set Lighted On/Off
switch to “Off”position and unplug power cord from electrical outlet. Refer to
Care and
Storage Guidelines
on page 13 of this manual for proper cleaning and storage procedures.
