6
| ENGLISH
FILLING BOILER WITH WATER
1.
Place Compact Fabric Steamer on a flat, level surface.
2.
Make sure power cord is unplugged from electrical outlet.
CAUTION: If unit has been in use, allow Boiler to cool (5 minutes for minimum cooling
before removing Water Reservoir Cap and adding water).
3.
Remove Water Reservoir Cap by turning clockwise.
4.
Carefully fill Boiler with water from a faucet, bottle or cup. Use Boiler Level Window to
gauge water level, stopping when it reaches the MAX mark.
WARNING: MAX mark on Boiler Level Window represents the unit’s maximum usable
water capacity (11.35 oz. / 335 ml.). Exceeding this amount will result in water spitting
from Steam Nozzle.
NOTE: In order to minimize potential mineral build-up and prolong the life of your
Compact Fabric Steamer, distilled or de-mineralized water is recommended when
filling Boiler.
5.
Replace Water Reservoir Cap by turning counter clockwise and until the arrows are aligned.
Aligned Arrows
Using Your
Compact Fabric Steamer
