background image

4

Top Innovations, Inc.

ENGLISH

ESP

AÑOL

SAVE THESE INSTRUCTIONS!

FOR HOUSEHOLD USE ONLY

IMPORTANT SAFETY INSTRUCTIONS

11.

If Power Indicator Light does not illuminate when On/Off Switch is set to “On” (I) position, unit 

is not operating normally.  Immediately turn unit off and disconnect from power supply, then 
refer to troubleshooting guide on Page 12 of this manual for assistance.

12.

Always turn off unit and unplug power cord before moving or filling Water Tank with distilled 

water.

13.

Do not use unit outdoors or operate where aerosol (spray) products are being used, or where 

oxygen is being administered.

14.

Unit is only meant to be used with recommended SF-622 accessories.  Using other types of

attachments may cause damage to unit or injury.

15.

When filling Water Tank, only distilled or de-mineralized water should be used in unit, in order 

to minimize potential build-up of mineral deposits.  Other cleaning agents could damage unit or 
cause injury.  Do not overfill unit.

16.

Do not attempt to use steam burst function without properly filling Water Tank.

17. 

To minimize risk of contact with hot water or steam, do not hold Pressing Plate open more than 

3” (75 mm.) when using steam burst function.

18. 

To reduce risk of contact with hot water emitting from steam vents, check appliance before each 

use by positioning it away from body and pressing Steam Burst Button. Do not operate unit if 
steam vents are blocked.

19.

Burns can occur from touching hot metal parts, hot water, or steam.  Do not touch Pressing Plate 

while unit is in use.  Do not turn unit upside-down - it may contain hot water.

20.

When pressing/steaming any item for the first time, it is recommended that you consult the 

manufacturer’s guidelines for material being steamed.  For items in question, test on an
inconspicuous area before proceeding.

21.

Do not allow power cord to touch hot surfaces during use.  Bundle cord inside Cord Storage 

Compartment when storing.

22.

Always allow 

Compact Digital Steam Press 

to cool completely (at least 30 minutes) before

storing.

13

Top Innovations, Inc.

A

POYO AL

C

LIENTE Y

E

SPECIFICACIONES DEL

P

RODUCTO

J1622

ESPECIFICACIONES DEL PRODUCTO

VOLTAJE: 

120V

VATIAJE: 

1500W

AMPERES: 

13A

CAPACDAD DE AGUA: 

180 ML. (6 OZ.)

TIEMPO PARA CALENTAR: 

1.5 MIN. - 3 MIN. (APROXIMADAMENTE)

RANGO DE TEMPERATURA: 

85°C - 220°C (185°F - 428°F)

PESO DE UNIDAD: 

5 KG. (11 LBS.)

DIMENSIONES DE UNIDAD (LxANxAL): 

54.6 CM. (21.5”) x 36.2 CM. (14.25”) x 21.0 CM. (8.25”)

APOYO AL CLIENTE

Para los problemas con su 

Prensa Compacta Digital de Vapor

, refiérase por favor a la guía de

resolviendo problemas situada en la Página 12 de este manual.  Las quejas adicionales se
deben dirigir a nuestros Servicios de Ayuda al Cliente en nuestra página de la red

www.SteamFast.com

, en la sección de 

Contact Us

.

Si usted no tiene acceso al Internet, usted puede también ponerse en contacto con nuestro
Departamento de la Ayuda al Cliente por teléfono, al 

(800) 711-6617 

o

(816) 584-9700, 

extensión

130 

o

131

.

NOTA: Para que nuestros representantes de ayuda al cliente puedan ayudarle rápida y 
eficientemente como sea posible, tenga por favor lista la siguiente información antes de
llamar:

• Información de la compra (donde y cuando usted compró este producto)
• Numero de Series del Producto

NUMERO SERIAL DEL PRODUCTO

Para su conveniencia, un espacio ha sido provisto aquí abajo para que usted anote el numero de
serie de su unidad (ubicado en la parte de atras o la parte inferior de la unidad) para facilitar la
referencia cuando se ponga en contacto con nuestro Departmento de Servicio al Cliente.

__________________ - _____________________________________

Summary of Contents for SF-622

















Reviews: