ENGLISH | 7
FIGURE 2
FILLING WATER TANK (FOR STEAM IRONING)
1.
Turn off and unplug unit.
2.
Place unit (Ironing Plate down) on a flat, heat-resistant surface.
3.
Fill Measuring Cup with water up to (1.1 oz. / 32 ml.).
NOTE: In order to extend the life of your unit and keep it functioning
at it’s maximum potential, it is highly recommended that distilled or
de-mineralized water be used in Water Tank.
4.
Open Water Tank Cap. Pour water from Measuring Cup into Water Tank
(FIGURE 2). Close Water Tank Cap.
While steam-ironing, the Water Tank Windows let you monitor the water level in
the Water Tank. When the water level becomes low:
1.
Turn off and unplug unit. Allow to cool for at least 5 minutes.
2.
Follow
STEPS 1-3
above.
3.
Plug power cord back in and resume ironing as usual.
