ENGLISH | 9
CLEANING & STORAGE
1.
Turn Temperature Control Dial to "off" (O) position. Unplug power cord.
2.
Prop unit upright on Stands and allow Ironing Plate to cool for 30 minutes.
3.
Open Water Tank Cap and drain any remaining water into a sink or tub. Close Cap
when finished.
4.
Wipe Main Body and Ironing Plate with a soft cloth lightly
moistened with water.
• DO NOT clean Ironing Plate with detergents or descalers.
• DO NOT clean Ironing Plate with abrasive or
corrosive products.
• DO NOT submerge unit or hold unit under running water.
5.
Wrap power cord around base of Hand Grip and secure end
in Power Cord Clip as shown (FIGURE 5). Place unit and
Measuring Cup inside Travel bag and store in a cool, dry location.
MINERAL BUILD-UP
1.
Follow
STEPS 1-3
under
CLEANING & STORAGE
section above; however,
leave Water Tank Cap open.
2.
Make a mixture of 0.5 oz. distilled water and 0.5 oz. vinegar.
3.
Using included Measuring Cup, pour water-vinegar solution into Water Tank.
Close Water Tank Cap.
4.
Follow normal steam ironing procedure, as outlined on Page 8. Allow unit to
steam out full contents of Water Tank. When finished, lock Steam Button in
lowered position and unplug unit.
5.
Allow to cool for 5 minutes, then refill Water Tank with fresh distilled water.
Repeat
STEP 4
until vinegar odor dissipates.
6.
Store unit as normal.
FIGURE 5
Storage & Care
