TROUBLE
SHOOTING THE STEAMER
PROBLEM
CAUSE
SOLUTION
Steamer fails to heat
Steamer not plugged
in
Plug in to electrical outlet
Auto shut
off
engaged
check water container. add water
if empty.
Reset ON/OFF switch.
No steam
water level
is low
Turn
ON/OFF
switch
OFF
and refill
water container
Water drips from nozzle
Condensation in hose
Hold the hose vertical and allow
water to drain back to tank
Nozzle gurgles
condensation in hose
Hold the hose vertical and allow
water to drain
back to tank
Steam is intermittent sediment
in container
Follow the removing mineral
buildup procedure
Water tank
Valve plunger
Follow
the "Reassembling The
Valve leaks
is
removed
Water Tank Valve Cap" Procedure
Note: Water chemicals and conditions will vary in different areas.
To
insure continued operation of the steamer, never store without
cleaning and removing excess water from the reservoir and
water container.
The brush attachment can be used to
gently brush the nap of fabric such as
corduroy.
Do
not use brush on delicate fabrics
such as silk or satin.
P.10
