10
Storing the Appliance
To STORE the steam generating iron:
UNPLUG THE UNIT. Allow it cool completely.
THE UNIT SHOULD ALWAYS BE STORED FLAT and NOT PLACED ON
ITS SIDE.
Empty the Water Reservoir Tank by the Water Reservoir Tank Plug. Turn
the Tank upside down over a sink to have the water drain completely.
Shake it to remove the most of the water.
Return the Tank Plug to its original position. Turn OFF the Temperature
Control Dial. Wind the cords loosely around the body of the iron and set
the iron on the non-slip iron rest.
You can now store the entire unit.
Other notes regarding CARE of the iron:
USE distilled water in areas where there is hard water.
DO NOT use perfumed products or products containing alcohol since they
will damage your iron.
DO NOT place the metal soleplate on a rough or abrasive surface. This
will avoid scratching.
Any starch residue left on the metal soleplate can be removed with a
dam0p cloth or with a non-abrasive cleaner while the iron is still slightly
warm.
For stubbom spots on the surface of the metal soleplate use a solution of
vinegar and water, or ask in your local hardware store for a special
solution to clean such stains.
ONLY put water in the Water Reservoir Tank. Never pour any other kind
of liquid inside it.
