Steba E 120, Instructions For Use Manual

11

Assembly:

The motor base should be wiped with a damp cloth. All other parts can be rinsed 

∙

and dryed.  

Attantion: In the sieve are sharp knives!

Take care, that the switch is on position “0”

∙

Place the juice collector onto the motor base, the juice spout should be placed in 

∙

the curving of the motor base.
Put the sieve into the juice collector. Then press the sieve without force at the edges 

∙

on the motor base until you hear a slight click sound. Take care that the sieve is not 
shaky.
Put the lid on the juice collector and close the locks.

∙

Ensure that the locking bow is tightly closed.

∙

Place an pulp connector under the pulp ejection. Hint: For a more easy cleaning of 

∙

the pulp container put a small plastic bag inside to collect the pulp.  
Place the juice collector under the spout.

∙

Then plug in the appliance.

Usuage:

When the appliance is used for the first time the motor can have a little smell, 

∙

which stops fast
Switch position “I”: slow speed- for soft fruits like grapes, melon, etc Switch poition 

∙

“II”: high speed- for hard fruits and vegetables like apples, carrots etc
Never place food with a stone or a hard skin into the feeding opening.

∙

Press the pusher slowly, without force down. Never use any other appliances or put 

∙

fingers into the feedding opening. Risk of injuries!
After the last filling let the appliance work for some seconds, that the juice can 

∙

drop out of the spout.
Do not overfill the pulp container, as this can cause problems during usage or even 

∙

damage the appliance.