12
How to use the device
∙
Plug the device into an earthed socket.
∙ A signal tone sounds, the display is illuminated. The device is in stand-by mode.
∙
Place the induction suited cookware with a min. diameter of 12cm on the plate.
∙
Press the on/off button. The display shows “ON”.
∙
Chose temperature or power with the select button .
∙
The temperature can be adjusted with the +/- button in steps of 60 – 80 – 120 – 150
– 180 – 200 – 220 – 240°C. The power can be adjusted in steps of:
∙ right plate: 400 - 600 - 800 - 1000 - 1100 - 1200 - 1300 - 1400 watts
∙ left plate: 300 - 700 - 1000 - 1200 - 1400 - 1600 1800 - 2000 watts
∙
The device starts.
∙
During operation, the temperature or power can be changed.
Timer
∙
If the temperature or power is set and no amendments are made, the device turns
off automatically after 2:59 hours.
∙
Press the timer button . The display shows “0000”, after 5 seconds the device gets
back to normal operation.
∙
Max timer setting is 2 hours 59 minutes
∙ Set the hours with the
button.
∙ Set the minutes with the
button.
∙
The time is accepted within 5 seconds and the time begins to count down.
∙
The display shows time and temperature in change.
∙
The time can be changed by pressing the timer button and the +/- buttons.
∙ After the time run out a signal tone sounds and the device switches automatically
into the stand-by mode.
Residual heat
∙ After turning off the device the display shows:
H
the temperature of the plate is above 60°C
∙
The ventilation of the device runs for a couple of minutes after the device has been
turn off. Unplug after the ventilation shuts off.
