19
Vacuum hose
∙ Do not fill the vacuum container too high with liquids.
∙ Put the vacuum hose on the vacuum nozzle 6).
∙ Place the other end of the hose on the vacuum container.
∙ Press the button 4) for vacuuming. The device works and stops automatically.
Troubleshooting
Dear Client,
Thank you for buying this STEBA product. The following table will help you with
problems that may occur when using your device. For many problems there is a simple
solution, because not everything that appears like a malfunction must be serious.
Please check the following list before contacting our customer service.
Problem
Solution
Device does not
Work
∙ Do you have power?
∙ Is the lid locked?
∙ Is the film placed in the oval vacuum chamber?
∙ Is the aspiration covered by a film?
Air is in the bags
∙ The weld is not closed.
∙ Did you use an inappropriate film? (use only films suitable
for vacuuming)
∙ Is the film soiled or wet in the area of the weld?
∙ Is a crease at the weld?
∙ Is the sealing bar clean?
