23
742.110 | 14.50
EN
9.3
Setting the time
Note
The time must be once more set to the correct values if power is removed for
a longer period of time. After this, the same operating mode is displayed as was active
previous to the removal of power.
√
flashes.
1. Press
SET
. The hours display flashes.
2. Press
to change the hour.
3. Press
SET
. The minute flashes.
4. Press
to change the minute.
5. Press
SET
. The change is adopted.
9.4
Setting the system
Note
The systems are described in section 4.4, p. 10.
√
S
yst
flashes.
1. Press
SET
. The number of the current system flashes.
2. Press
to select a different system.
3. Press
SET
. The change is adopted.
9.5
Setting the functions
√
F
unc
flashes.
X
Continue as described in section 10.
9.6
Setting the parameters
Note
Details on the parameters are provided in section 11, p. 39.
√
P
ara
flashes.
1. Press
SET
.
P:01
(Parameter number) flashes.
2. Press
to display a different parameter.
3. Press
SET
. The value of the parameter is displayed, associated components flash in
the system graphics.
4. Press
SET
. The parameter value flashes.
5. Press
to change the value.
6. Press
SET
to adopt the change.
7. Press
ESC
. The parameter number is displayed (flashing).
8. If necessary, repeat steps 2 – 7.
9.7
Resetting to factory settings
√
flashes,
RESEt
is displayed (
RE
and
SEt
alternately).
1. Press and hold
SET
for 5 seconds.
2. A progress display is shown for a few seconds. After this the reset is finished.
3. Continue as described in section 5, p. 11.
Summary of Contents for TR-A501T-U
Page 47: ...47 742 110 14 50 EN 18 Notes ...
Page 48: ...48 742 110 14 50 EN 742110 ...
