Steelcase
32
Preparing to use ēno
Using ēno with a different host computer
The newer ēno receiver makes cordless communication with a different
host computer easy.
To use ēno with a different host computer:
1. Make sure the ēno App 2.4 or higher is installed on the computer.
2. Move the ēno receiver to the USB port on the computer.
There is no need to pair the stylus again.
Removing a stylus paired to the ēno receiver
Related topics:
You can pair up to three ēno styli to one ēno receiver.
To remove every ēno stylus that is paired to one ēno receiver:
•
Press and hold the button on the ēno receiver for no less than ten
seconds. A status message appears on the computer screen to indicate
that all pairing was removed from the ēno receiver.
To remove any one stylus paired to the ēno receiver:
1. Click the ēno App icon on the host computer.
2. Choose “Settings for ēno App” from the menu.
3. Click the “Status” tab.
4. Turn on the ēno stylus by removing the cap.
5. Select the ēno stylus in the list of Products in the “Status” tab.
6. Click “Remove Stylus.”
