Steelcase
33
Preparing to use ēno
If you use the older PolyVision Bluetooth adapter...
Related topics:
“ēno stylus LED status summary”
If you upgraded to the ēno App version 3.0 or higher, you may be using the
original PolyVision Bluetooth adapter rather than the newer ēno receiver.
note:
NOTE:
You can obtain a new ēno receiver (service part number ENOREC01) by
contacting your Steelcase dealer or Technical Support. Refer to “Technical
support” on page 78.
When you use the original PolyVision Bluetooth adapter, the ēno stylus
establishes a Bluetooth connection to the host computer rather than to the
Bluetooth adapter. As a result, when you want to use ēno with a different
host computer in the same room, you need to unpair the ēno stylus from
the host computer before you can pair it to a different host computer.
To unpair the stylus from the host computer:
1. Click the ēno App icon on the host computer.
2. Choose “Settings for ēno App” from the menu.
3. Click the “Status” tab.
4. Turn on the ēno stylus by removing its cap.
5. Select the ēno stylus in the list of Products in the “Status” tab.
6. Click “Remove Stylus.”
newer ēno receiver
older PolyVision Bluetooth adapter
