Steelcase
38
Using ēno
This commonly occurs if:
•
the stylus is turned off by replacing the stylus cap. To resume
communication, simply remove the stylus cap.
•
the stylus has automatically entered sleep mode to save battery life after
a period of inactivity. To resume communication, simply replace the
stylus cap and then remove it again.
•
the stylus moves further than approximately 32 feet (10 m) from the host
computer. To resume communication, move closer to the host
computer, replace the stylus cap, and then remove it again.
•
the stylus battery needs to be replaced. Refer to “Install the ēno stylus
battery” on page 25.
Icon strip options
You can access the functions of the control icons in two ways:
•
by tapping the magnetic icon strip with the stylus. Refer to “Install the
magnetic icon strip” on page 21.
•
by tapping the on-screen icon strip with the stylus. To view the on-
screen icon strip, refer to “Using the on-screen icon strip” on page 72.
note:
NOTE:
If you upgraded to ēno App version 3 but still use the older magnetic icon
strip, refer to “If you have the older ēno icon strip” on page 50.
You can obtain a new ēno App icon strip (service part number
ENOAPPSTRIPA) by contacting your Steelcase dealer or Technical
Support. Refer to “Technical support” on page 78.
