Steelcase
86
Appendix 1: ēno Bluetooth pairing options
•
Pair a Device
•
Search for a Device.
The stylus is listed as “ADP-301” and is only visible briefly after the
cap is removed. If you do not see the stylus, replace the cap, wait
two seconds, and remove the cap back again. After six seconds the
stylus is visible to the computer.
4. Follow the prompts from the third-party Bluetooth software. The
general process is as follows:
•
Search for Bluetooth devices and select the “ADP-301 stylus.”
•
Pair the ADP-301 stylus. When asked, the stylus uses a PIN code
or passkey of “0109”.
•
After entering the PIN code, the stylus should pair to your com-
puter.
To determine if the pairing is successful and there is wireless
communication between the ēno App installed on your computer and the
ēno stylus:
1. Turn on the ēno stylus by removing the cap.
2. On your computer, click the ēno App icon that appears in your
system tray (Windows) or menu extras (Macintosh).
3. Choose “Settings for ēno App” from the menu.
4. Click the “Status” tab. The stylus should be listed as a Product.
