Steelcase
88
Appendix 2: ēno one Projector Control Application
4. Click “Add Projector.” The projector first appears in the dialog box as
“Not Connected” with the Port displaying “None.”
5. Move your cursor over the link under “Port.” You see a drop-down
list of available ports on the computer.
6. Select the port from the drop-down list where your projector is
connected. The projector status changes to “Connected” and
configuration is complete.
Projector status
The status of a projector appears in the Projector Control Configuration
dialog under “Status,” as follows:
The status of the ēno App appears in a separate line in the Projector
Control Configuration dialog, as follows:
Status Meaning
Not Connected
The projector cannot be found on the
port.
Connected
The projector has been found and is
connected.
Status message
Meaning
Connecting…
The PCA software is connecting to the
ēno App API.
The ēno Application is not running.
The ēno App is not running in the
system currently.
