21
Consult the car owner’s handbook for location of anchor fittings or
anchorage points. Some vehicle manufacturers have an anchor fitting
fitted in the car.
If there is no child restraint anchor fitting or child restraint anchor
point refer to page 51 for the installation of the anchor fitting as well
as the use of extension straps.
An anchor fitting is required to attach the upper anchorage strap to
fully install the Capsule to the car. The upper anchorage strap must be
used with this capsule when used in the car.
For installing the Base to the car, select a seating position with a child
restraint anchor fitting directly behind the seating position.
HOW TO INSTALL
INSTALLING THE BASE TO THE CAR
A. Place the base and Baby
Capsule on vehicle seat in
a seating position where a
child restraint anchor fitting is
installed. The Level Indicator
Line needs to be level with the
road, (ie parallel with the road
surface). Check and adjust
the recline angle of the base if
necessary.
Level Indicator Line on
both sides of base.
Summary of Contents for BABY CAPSULE
Page 5: ...5 INTRODUCTION ...