CLICK & GO BASSINET | 13
Care & Maintenance
General Maintenance & Repair
•
Ensure all safety devices, locks, harness, and brakes are in
working order.
•
Ensure all joints and folding areas move freely as intended.
•
Should any moving or locking parts become stiff or hard to
operate, ensure these are free from tension, or dirt by wiping
clean with a damp cloth to remove any dirt, sand, or debris.
Allow to dry and lightly spray with a dry silicon lubricant. Please
carefully read the lubricant instructions prior to use.
•
Ensure wheels are regularly cleaned with a damp cloth by
removing dirt, sand, or debris. Allow to dry and lightly spray
the wheel pivot pin with a dry silicon lubricant to keep the
wheels moving smoothly. Please carefully read the lubricant
instructions prior to use.
•
Regularly spray all moving parts with a dry silicon lubricant.
Please carefully read the lubricant instructions prior to use.
•
Ensure all connecting rivets and screws are secure.
Tighten if required.
•
If there are compression marks on the tyres, use a domestic
hair dryer to gently warm (DO NOT OVERHEAT) the tyre and the
compression marks should slowly disappear.
•
To maintain the safety and longevity of the stroller, seek prompt
repairs or replacement for bent, torn, worn, or broken parts. Do
not continue to use the stroller if unsafe.
•
All repairs should only be carried out by an authorised Britax/
Steelcraft repairer. Only Britax/Steelcraft replacement parts
should be used with the stroller. It may be unsafe to use parts
supplied from another manufacturer.
General Tips
Do not store the stroller in your car
for prolonged periods of time
during summer as it may lead to damage to some of the plastics
components.
Do not leave the stroller in direct sunlight
for extended periods
of time, as colours of some fabrics may fade, and tyres may
deteriorate.
Do not fold or store the stroller if damp or wet
, as fabric may
develop mould or mildew. Always store the stroller inside in a dry,
well-ventilated area.
Do not place heavy objects on top of the stroller
as it may alter
the shape.
Should you have any further questions on care & maintenance
of the stroller, please contact our Consumer Service Team at:
au-support@britax.com
Care & Maintenance
Cleaning
Fabrics
•
Removable fabrics may be cleaned using lukewarm water and
soap or mild detergent. Rinse thoroughly and allow to dry away
from direct sunlight.
•
Non-removable fabrics can be spot cleaned using a damp
sponge and soap or mild detergent. Allow to dry completely
before re-use or storage.
•
Never use bleach, or abrasive cleaning products.
•
DO NOT
iron or dry clean.
NOTE:
DO NOT
place any of the stroller fabrics in the dryer. Allow
to dry naturally, away from direct sunlight.
Frame
•
Remove dirt and dust away from any moving mechanism.
•
Clean frame with a soft damp cloth and soap or mild detergent
and allow to dry thoroughly.
•
DO NOT
use abrasive cleaning products as it may cause stains,
discolouration or scratches to the frame.
•
DO NOT
soak or submerge frame in water.
•
DO NOT
remove, dismantle or alter any part of the stroller
mechanism or brakes.
Leatherette
•
Spot clean with a damp soft cloth.
•
DO NOT
use a dripping wet cloth or wet the
leatherette excessively.
Wheels
•
Remove wheels from stroller.
•
Clean with damp cloth and soap or mild detergent. Use brush
to remove dirt and mud build up around the tyre. Allow to dry
thoroughly before placing wheels back on the frame.
•
If necessary lubricate wheel shaft with a small amount of
lubricant before placing into the stroller.
•
Ensure the stroller is cleaned thoroughly after using it on the
beach as sand and salt can damage stroller mechanism, wheel
assembly, causing premature wear and corrosion.
PLEASE NOTE:
Our product warranty does not cover any rust to the rivets or
screws, if you are caught in the rain or at the beach always
thoroughly dry the frame to avoid any rust damage.
Summary of Contents for click & go
Page 18: ...18 Notes...
Page 19: ...CLICK GO BASSINET 19 Notes...
