background image

32

Owner’s Manual 

LIMITED WARRANTY (cont’d)

THIS WARRANTY DOES NOT COVER:

Merchandise sold as reconditioned, used as rental equipment, or floor or display

models.

Merchandise that has become damaged or inoperative because of ordinary wear,

misuse, cold, heat, rain, excessive humidity, freeze damage, use of improper

chemicals, negligence, accident, failure to operate the product in accordance

with the instructions provided in the Owner’s Manual(s) supplied with the

product, improper maintenance, the use of accessories or attachments not

recommended by Steele®, or unauthorized repair or alterations.

Repair and transportation costs of merchandise determined not to be defective.

Costs associated with assembly, required oil, adjustments or other installation and

start-up costs.

Expendable parts or accessories supplied with the product which are expected to

become inoperative or unusable after a reasonable period of use.

Merchandise sold by Steele® which has been manufactured by and

identified as the product of another company, such as gasoline engines. The

product manufacturer's warranty, if any, will apply.

ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR

EXPENSE THAT MAY RESULT FROM ANY DEFECTS, FAILURE OR

MALFUNCTION OF THE PRODUCT IS NOT COVERED BY THIS

WARRANTY. Some states do not allow the exclusion, so it may not apply to you.

IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR

FROM THE DATE OF ORIGINAL PURCHASE. Some states do not allow

limitations on how long an implied warranty lasts, so the above limitations may not apply.

"-,-20#230,2-12-0#
$IL2?=BHC=;FMMCMN;H=?.F?;M?!;FF

12-.

Summary of Contents for SP-CE355TM

































Reviews: