OWNER’S MANUAL
2
GENERAL SAFETY RULES
WARNING!
Read and understand all instructions.
Failure to follow all instruction
listed below, may result in electrical shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS WELL
Work Area
1.
Keep your work area clean and well lit
, Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presences
of flammable liquids, gases, or dust
. Power tools create sparks, which may ignite the
dust or fumes.
3.
Keep bystanders, children and visitors away while operating a power tool
.
Distractions can cause you to loose control.
Electrical Safety
4.
Double insulated tools are equipped with a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet. Do not change the plug in any
way
. Double insulation eliminates the need for the three wire grounded power cord and
grounded power supply system.
5.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerator
. There is an increased risk of electrical shock if your body is
grounded.
6.
Don't expose power tools to rain or wet conditions
. Water entering a power tool will
increase the risk of electrical shock.
7.
Do not abuse the cord
. Never use the cord to carry the tools or pull the plug from the
outlet. Keep cord away from heat, oil, sharp edges or moving parts.
8.
When operating a power tool outside, use an outdoor extension cord marked
"W-A" or "W"
. These cords are rated for outdoor use and reduce the risk of electrical
shock.
Personal Safety
9.
Stay alert, watch what you are doing and use common sense when operating a
power tool.
Do not use tool while tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
Summary of Contents for SP-PT235
Page 1: ......