ST1001 6" Jointer
-9-
Floor Load
The Model ST1001 weighs 205 lbs. and has a base
footprint of 26" W x 22" D.
Machine Placement
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables, or other
machinery when establishing a location for your saw.
See
Figure 4
for the minimum working clearances of
the Model ST1001.
Unsupervised children and
visitors inside your shop could
cause serious personal injury
to themselves. Lock all entranc-
es to the shop when you are
away and DO NOT allow unsu-
pervised children or visitors in
your shop at any time!
The unpainted surfaces are coated with a waxy oil
to protect them from corrosion during shipment.
Remove this protective coating with a solvent cleaner
or citrus-based degreaser.
To clean thoroughly, some parts may need to be
removed.
For optimum performance from your
machine, make sure you clean all moving parts or
sliding contact surfaces that are coated.
Avoid chlorine-based solvents as they may damage
painted surfaces should they come in contact. Always
follow the manufacturer’s instructions when using
any type of cleaning product.
Gasoline and petroleum
products have low flash
points and could cause an
explosion or fire if used
to clean machinery. DO
NOT use gasoline or petro-
leum products to clean the
machinery.
Many of the solvents
commonly used to clean
machinery can be toxic
when inhaled or ingested.
Lack of ventilation while
using these solvents could
cause serious personal
health risks or fire. Take
precautions from this haz-
ard by only using cleaning
solvents in a well ventilat-
ed area.
Site Considerations
Cleanup
Figure 4.
Model ST1001 overhead view dimensions.
��
�
�
�
�
��
�
�
�
�
Summary of Contents for ST1001
