-16-
ST1001 6" Jointer
Damage to your eyes, lungs, and ears could
result from using this machine without proper
protective gear. Always wear safety glasses, a
respirator, and hearing protection when oper-
ating this machine.
Loose hair/clothing could
get caught in machinery
and cause serious personal
injury. Keep clothing and
long hair away from moving
machinery.
Operation Safety
OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY RECOM-
MEND that you read books, trade magazines,
or get formal training before beginning any
projects.
Basic Controls
This section covers the basic controls used during
routine operations.
Table Movement:
To move the infeed table, loosen
the table lock (
Figure 22
), and move the table with
the table lever. Lock the table after the depth of cut
has been set. The infeed controls feature a plunger
that automatically locks the table when the depth of
cut is adjusted to 1/8", which is the maximum depth
of cut that can be safely performed on this machine.
Infeed Table Positive Stops:
The infeed table fea-
tures positive stops that control the minimum and
maximum range of movement of the infeed table.
Figure 23.
Infeed table positive stops.
Infeed Table
Positive Stops
Figure 22.
Table control locations.
Outfeed Table
Knob
Table
Lever
Plunger
Cutting Depth Scale
Infeed Table Lock
Summary of Contents for ST1001
