ST1013 12" Jointer (Mfd. Since 3/16)
-7-
ELECTRICAL EQUIPMENT INJURY RISKS. You can
be shocked, burned, or killed by touching live electri-
cal components or improperly grounded machinery.
To reduce this risk, only allow qualified service per-
sonnel to do electrical installation or repair work, and
always disconnect power before accessing or expos-
ing electrical equipment.
DISCONNECT POWER FIRST. Always disconnect
machine from power supply BEFORE making adjust-
ments, changing tooling, or servicing machine. This
prevents an injury risk from unintended startup or
contact with live electrical components.
EYE PROTECTION. Always wear ANSI-approved safe-
ty glasses or a face shield when operating or observ-
ing machinery to reduce the risk of eye injury or
blindness from flying particles. Everyday eyeglasses
are NOT approved safety glasses.
OWNER’S MANUAL. Read and understand this
owner’s manual BEFORE using machine.
TRAINED OPERATORS ONLY. Untrained operators
have a higher risk of being hurt or killed. Only
allow trained/supervised people to use this machine.
When machine is not being used, disconnect power,
remove switch keys, or lock-out machine to prevent
unauthorized use—especially around children. Make
workshop kid proof!
DANGEROUS ENVIRONMENTS. Do not use machin-
ery in areas that are wet, cluttered, or have poor
lighting. Operating machinery in these areas greatly
increases the risk of accidents and injury.
MENTAL ALERTNESS REQUIRED. Full mental alert-
ness is required for safe operation of machinery.
Never operate under the influence of drugs or alco-
hol, when tired, or when distracted.
For Your Own Safety, Read Instruction Manual
Before Operating This Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words intended to convey the level of importance of the
safety messages. The progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
Always use common sense and good judgment.
Indicates a potentially hazardous situation which, if not avoided, MAY
result in minor or moderate injury. It may also be used to alert against
unsafe practices.
Indicates a potentially hazardous situation which, if not avoided, COULD
result in death or serious injury.
Indicates an imminently hazardous situation which, if not avoided, WILL
result in death or serious injury.
This symbol is used to alert the user to useful information about proper
operation of the machine.
NOTICE
Safety Instructions for Machinery
SAFETY
