background image

 

1. Alarm Armed:

 

Press button on the remote, is signaled by one flash of the direction lights, one acoustic signal of siren and 
one acoustic signal of remote, doors will lock, the system will be armed in 3 seconds in alarm mode. The display 
on the remote is: 
 

2. Mute Armed:

 

Press button on the remote, is signaled by one flash of the direction lights, one acoustic signal of remote, 
doors will lock, the system will be armed in 3 seconds in mute mode. The display on the remote is: 
 

3. Disarm the system in alarm mode

 

In alarm armed status, press button

to disarm the system, at the same time, the doors will be unlocked, the 

direction lights will flash twice, the siren will chirp twice and the remote will beep. The display on the remote is: 
 

4. Disarm the system in mute mode

   

In alarm armed status, press button

to disarm the system, at the same time, the doors will be unlocked, the 

direction lights will flash twice, the siren will not chirp and the remote will beep. The display on the remote is: 
 

5. Trunk opening with remote

 

Press button 

at the same time to open the trunk of the parked car. The display in the remote is:

 

 

 

6. Auto lock/unlock the door 

The doors will be locked when the foot brake is pressed in 15 seconds after the car started. The doors will be 
unlocked when the car stopped and the ACC is on off position. 
In driving status, press button to lock the doors, press button

to unlock the doors. 

         

7. Locating the vehicle in parking lot with sound and flash 

Summary of Contents for 888















Reviews: