V06-2017
ST2520
4
2.0 INTRODUCTION STEENBECK ST2520:
Congratulations purchasing the flatbed 2 plate ST2520 motor film rewinder / film
inspection table. This machine is a fine piece of film equipment and the ideal partner
for film archives, film laboratories, projection rooms or film restoration companies.
The ST2520 offers:
- easy and safe motorized film handling by hand or optional foot control
(option 2259).
- very slow speed ideal for inspection film perforation, damages, cutting/ editing
and cleaning film purposes.
- fast winding of 16 and 35mm picture / sound film and 17,5mm sound film in A-
wind .
- checking measurements of film by optional electronic universal counter.
(option ST2258)
3.0 GENERAL FEATURES:
- Single motor drive system for fully variable speed.
- Small and easily moveable chassis.
- Solvent resistant table top with enough space to work for operator.
- Maximum speed of 6 meters / 20 feet per second in both directions.
- Adjustable wind tensions.
- Maximum capacity of approx. 650 meter / 2000 feet of acetate film on bobbins or
16mm film reels or 1000 meter / 3000 feet of PE sound film.
- Easy and safe motor operation by hand or optional foot control.
- Ultra low speed film transport of approx. 0,5 frames per second (35mm) ideal for
film inspection
like damages, joins and cleaning film by hand.
- Automatic stop at film end or when film breaks with warning signal by buzzer.
- Accurate counting using optional electronic universal processor counter with
sprockets 16mm and 35mm or with optional special roller (toothless) for
shrunken and damaged material, accuracy less than 0,5%.
- Large ground glass back-illuminated by a 7000K (approx.) light source.
- Dimmer with socket is installed for the optional work lamp (max. 75 watt)
- Standard installed with a elapsed hour counter for maintenance purposes.
- All guide rollers fitted with ball bearings for extended life.
- Transport (front) castors with brakes.