V06-2017
ST2520
5
4.0 TECHNICAL DATA:
The 2 plate motor film rewinder / film inspection table is capable of handling all
picture and magnetic sound films 16 / 17,5 / 35mm.
Motorized winding and speed regulation is accomplished by hand or foot control.
One-motor drive with belt system for both winding directions.
The minimum and maximum speed range is available in both directions.
Fully variable rewinding speed of max. 6 meters per second ( EU regulation)
This is for 650 meters / 2000 feet of film is approx. 2 minutes.
Adjustable film tension of the frictions remains steady over full film length.
Take-ups with film plates to accept bobbins according to DIN 15531 and 16mm reels
according to DIN 15621.
Power requirements:
220 / 240 Volts – 50 / 60 Hz.
On request:
100 / 110 Volts – 50 / 60 Hz.
Power consumption:
approx. 600 watt. (in full running mode)
Table size:
width 107cm. - depth 70cm. - height (bench) 81cm.
height with counter 97cm. / w/o/ counter 91,5cm.
Weight:
approx. 60 kg.
Fuses:
Main power inlet EU socket (rear of frame):
For 220/240 Volts: 2 x 6,3 A
T
- for 100/110 Volts: 2 x 8 A
T
Illuminated ground glass (outside):
For 220/240 and 100/110 Volts: 1 x 0,5 A
T
PSU counter system (inside):
For 220/240 Volts : 1 x 0,315 A
T
For 100/110 Volts : 1 x 0,8 A
T
Driver board (inside); see fig. 13 page 19
- 1 A T
- 1 A T
- 6,3 A T
- 1 A T
All fuses are standard Slow blown / T. Do not use any fast blown fuses !
OPTIONAL EXTRAS:
ST 58
table working lamp
ST 2258
electronic universal processor counter
including sprockets for (S)16 – 17,5 – 35mm.
ST 2260
counter roller toothless sprocket for ST2558.
ST 2259
foot control