background image

IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS

PLEASE READ CAREFULLY THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO
YOUR EQUIPMENT.
1. Read Instructions -

 All the safety and operating instructions should be read before the 

appliance is operated.

2. Retain Instructions -

 The safety and operating instructions should be retained for future 

reference.

3. Heed Warnings -

 All warnings on the appliance and in the operating instructions should be

adhered to.

4. Follow Instructions -

 All operating and use instructions should be followed.

5. Water and Moisture - 

The appliance should not be used near

water-for example, near a bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool and the like.

6. Carts and Stands -

 The appliance should be used only with a cart or stand

that is recommended by the manufacturer.

6A.

An appliance and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the appliance and cart combination to overturn.

7. Wall or Ceiling Mounting -

 The appliance should be mounted to a wall or ceiling only as 

recommended by the manufacturer.

8. Ventilation -

 The appliance should be situated so that its location or position does not interfere

with-its proper ventilation. For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9. Heat -

 The appliance should be situated away from heat sources such as radiators, heat 

registers, stoves, or other appliances (including amplifiers) that produce heat.

10.Power Sources -

 The appliance should be connected to a power supply only of the type 

described in the operating instructions or as marked on the appliance.

11.Grounding or Polarization -

 Precautions should be taken so that the grounding or polarization

means of an appliance is not impeded.

12.Power -

 Cord Protection - Power-supply cords should be routed so that they are not likely 

to be walked on or pinched by items placed upon or against them, paying particular attention
to cords at plugs, and the point where they exit from the appliance.

13.Cleaning -

 The appliance should be cleaned only as recommended by the manufacturer.

14.

This product is designed for use with the antenna attached and should not be connected to
any other external antennas.

15.Non-use Periods -

 The power cord of the appliance should be unplugged from the outlet 

when left unused for a long period of time.

16.Object and Liquid Entry -

 Care should be taken so objects do not fall and liquids are not 

spilled into the enclosure through openings

17.Damage Requiring Service -

 The appliance should be serviced by qualified service personnel

when:
A. The power-supply cord of the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change 

inperformance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Servicing -

 The user should not attempt to service the appliance beyond that 

described in the operating instructions. All other servicing should be referred to 
qualified service personnel.

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

www.monkeygamesroom.co.uk

Summary of Contents for ENCODE CD ROCK ZERO 50X2 ('09)







Reviews:

Related manuals for ENCODE CD ROCK ZERO 50X2 ('09)