8
INSTALLATION
Drill three equally spaced 3.2mm holes into the wall channels (1) and (2) on the
INSIDE
of the
screen.
Make sure that your drill holes are more than 20mm back from the glass edge when using
the smallest screen size. Otherwise you risk breaking the glass (see Diagram E).
Make sure that all the holes go though both the aluminium of the fixed side panel and the door
front assembly. Fix off wall channels (1) and (2) to fixed side panels (3) and (4) using the fixed
panel screws (6) and covering them with screw caps (7).
A. Fasten handle to door.
B. Fit bottom door seal.
C. Fit deflector seal to back of door.
D. Fit additional deflector seal to leading edge of
front fixed glass.
7
8
DIAGRAM E:
