2
HEALTH AND SAFETY
• The glass requires two people to handle.
• Always stand glass up after unpacking the components and use soft packing when
in contact with hard surfaces. Take care not to strike an edge or corner on a hard
surface.
• All glass is toughened and cannot be reworked or drilled.
• Wear protective gloves and eye protection.
• Special care should be taken when drilling walls to avoid hidden pipes or electrical
cables.
WARRANTY
• This covers product defects: bath screen 5 years, working parts 2 years and PVC
seals 1 year.
• Installation must comply with instructions to be under warranty.
• Damage or breakage on site is not covered in warranty.
MATERIALS REQUIRED
Sika Silaflex NG Silicone (Translucent) - Cleaning materials and Methylated Spirits
(from retailer).
TOOLS REQUIRED
LUNAR BATH SCREEN INSTALLATION
INTRODUCT0RY
Thank you for selecting a quality Stein Bathroomware Product.
WE RECOMMEND A TRADESMAN FAMILIAR WITH THIS TYPE OF INSTALLATION
BEFORE YOU START:
Read the instructions to understand the scope of the install.
• This swinging glass panel is adaptable to suit bath lips up to 30mm in height. This
is achieved with 3 seals in the kit to cover the variable heights (page 7).
•
Solid fixing to the wall is advised.
1. Wall Channel: Bath Lip design governs the positioning of wall channel. View
item D on page 5 for stud position. To cover variables, install stud with 90mm
face crosswise.
2.
Support Bar: A horizontal stud (90mm face crosswise) centered 1445mm off top
of bath and 350mm minimum from vertical stud.
• The wall needs to be plumb and the bath level for a satisfactory installation. Any
variations will need to be identified along with planning to overcome this.
