1. Guide the end of the nylon cord of the
floating handle
5
through the eyelet
on the handle
8
.
2. Shorten the nylon cord to a length that
roughly corresponds to the depth of
your pool and tie it in a knot.
The floating handle is attached.
Attaching the sail
1. Attach the sail
4
on the side of the
water discharge nozzle
9
.
The sail is installed.
Adjusting the wheels
You can adapt the working radius by adjusting the wheels.
We recommend the following settings:
C-A
(Setting for most pools (standard setting)
2
8
5
3
4
9
4
35
