Speedclean Eco 30
2011_V1
page 8 of 16
4 Parts List / Reference
Before starting installation, check to make sure all parts are present in package.
Primary Components
Pump Adapter 32/38mm (1)
Water Pump (1)
See attached Parts-List
Filter Tank (1)
Tank Cover with Control-Valve (1)
Tension Ring (1)
Filter Pump mounting screws (1)
See attached Parts-List
5 Installation
Instructions
5.1
Unpacking Your Filter System
Carefully remove the product and all component parts from the box. Cross reference all parts in the box with the
parts list reference chart to make certain all parts are present before beginning assembly.
5.2
Tools & Equipment Required
The following items are not included with your new filter system, but will be required for proper installation and
operation:
#2 Screwdriver
Quartz Sand with a particle size of 0.40 - 0.80mm in accordance with DIN EN 12904 (approx. 12 kg).
A small container of Vaseline.
G.F.C.I. (Ground Fault Circuit Interrupter)
An absolutely level 0.60 x 0.60 m surface made of filter gravel (crushed rock) or compressed concrete with
an open drainage attachment or drainage ditch for backwash water is necessary.
Proper installation, operation and maintenance of your filtration system are the best guarantees of good filtration
quality and a long service life. We recommend that you take note of the information presented in this handbook.
We are not liable for damages caused by non-professional electrical installation, or electrical installation not in ac-
cordance with instructions.
ADVICE
Summary of Contents for Speedclean Eco 30
Page 17: ......
