1. Insert the battery into the compartment at the back of the device.
2. Install the "BoChain" application [3.2.1] on your phone or the "PoChain"
software [3.2.2] on your computer. Connect the device to the logger via Bluetooth.
3. Hold down the function key [1] for 3 seconds (the indicator light [2] should start
flashing green) or select the appropriate option in the application/program on the
device.
4. To abort the logger, hold down the [1] button again for 3 seconds or select the
appropriate option in the application/program.
5. Configuration and data recording is done in the application or program
respectively. The user is able to configure the logger by selecting available options
in the application/program and to store the data read by the logger. In case of work
with a computer, a USB connection is necessary (the port is located on the back
side of the logger).
6. To save the current reading while the logger is operating, press the function key
[1]. The indicator light [2] will flash red to indicate that the reading has been stored.
3.2.1.
APPLICATION PREVIEW:
a) SBS-DL-10
3. Channel number
4. Current measurement value
5. Set limits
6. Alarm state (measurement close to the limit value)
7. Maximum reading
8. Minimum reading
9. Average reading
10.
Mean Kinetic Temperature
b) SBS-DL-20
