www.steinel.net
(800) 852-4343
n
at
Setup and Commissioning
Light level teach mode
The light level teach mode reads
the ambient light level in the
space and selects this amount for
the light level setting.
Ř
Turn the light level setting to
Ř
After 10 seconds, the value
of the ambient brightness is
saved.
Ř
This value is also available
after a power failure if the
potentiometer is set to teach
mode at power up.
Time delay
Time delay is the period of time
lights remain on after the last
detection. Adjustment ranges
from 5 seconds to 15 minutes.
Factory setting is 5 seconds.
Pulse function
For use with a time delay relay,
the pulse function activates the
output for 2 seconds.
After setup and commissioning
tests are complete, adjust
the time delay and light level
settings to fit the application
needs.
13
IS 3360-24
IS 345-24
IS 3180-24
5 sec.-15 min.
5 sec.-15 min.
