51
THOR 103
COD. 6909500060
STEL s.r.l.
– Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
GENERATOR
Inspect the inside of the generator from time to time (every 3-4 months),
removing the deposits of dust from the inside parts so that their cooling
and operation is not impeded. The frequency of this operation depends
on the position of the machine and on the quantity of dust and deposits
in the working atmosphere.
Frequently check that the power cables and connections are securely
fastened.
7.4- CHANGING WORN PARTS
Attention! The torch nozzle and the neighbouring parts reach high
temperatures during use; to avoid the risk of burns, wait for them
to cool down before carrying out maintenance work!
From time to time, or if you notice any malfunctions, inspect the torch
nozzle to see whether there is any damage. If the nozzle hole is
deteriorated or appears to be oval, it is time to change the spare parts.
Inspect the electrode: if the centre of the electrode has a cavity deeper
than 1.5 mm, change it.
No particular tools are needed to change the torch parts. Just unscrew
the closing cap and all the torch components can be easily replaced.
When you unscrew the cap you hear a slight click due to a microswitch
which disables the machine so as to avoid accidental starts. Once the
torch is in order, to start work again you must press the RESET button.
7.5- SPECIAL MAINTENANCE
For any special maintenance jobs, it is essential to have the necessary
technical knowledge and suitable equipment. Otherwise apply to the
nearest assistance centre.
ENGLISH
TECHNICAL
DESCRIPTION
51
THOR 103
COD. 6909500060
STEL s.r.l.
– Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
GENERATOR
Inspect the inside of the generator from time to time (every 3-4 months),
removing the deposits of dust from the inside parts so that their cooling
and operation is not impeded. The frequency of this operation depends
on the position of the machine and on the quantity of dust and deposits
in the working atmosphere.
Frequently check that the power cables and connections are securely
fastened.
7.4- CHANGING WORN PARTS
Attention! The torch nozzle and the neighbouring parts reach high
temperatures during use; to avoid the risk of burns, wait for them
to cool down before carrying out maintenance work!
From time to time, or if you notice any malfunctions, inspect the torch
nozzle to see whether there is any damage. If the nozzle hole is
deteriorated or appears to be oval, it is time to change the spare parts.
Inspect the electrode: if the centre of the electrode has a cavity deeper
than 1.5 mm, change it.
No particular tools are needed to change the torch parts. Just unscrew
the closing cap and all the torch components can be easily replaced.
When you unscrew the cap you hear a slight click due to a microswitch
which disables the machine so as to avoid accidental starts. Once the
torch is in order, to start work again you must press the RESET button.
7.5- SPECIAL MAINTENANCE
For any special maintenance jobs, it is essential to have the necessary
technical knowledge and suitable equipment. Otherwise apply to the
nearest assistance centre.
ENGLISH
TECHNICAL
DESCRIPTION
Summary of Contents for 607510000L
Page 144: ......