6935200020
15
SUB MENU
SELECTING ARC IGNITION
This type of setting allows to optimize the SOFT
START Feature
Low (LO):
Low
Medium (ME):
MEDIUM
High (HI):
High
(SKY-MIG 353K,SKY-MIG 353S-453S)
1) Switch ON the machine.
2) Press and hold for 3 seconds the button
FUNCTION – n.7.
3) The led of the burn back function flashes - the
display – n.4 shows bb.
4) Continue to hold, after 3 seconds the displays
shows START “ Str”.
5) After one second the display will show the default
start setting “ME“.
6) With the encoder n.8 select the type of start:
LOW
“Lo”
, MEDIUM
“ME”
, HIGH
“HI”
.
After 3 seconds, the machine will return to the
welding mode, welding can start .
(SKY-MIG 453K, SKY-MIG 553S)
1) Switch ON the machine.
2) Press and hold together for 3 seconds the button
PURGE and INCH
3) The displays show START “Str” and the type of
start selected.
4) Pressing INCH button is possible select the type of
start : LOW “Lo”, MEDIUM “ME”, HIGH “HI”.
After 3 seconds, the machine will return to the
welding mode and it will be possible start to weld .
SETTING WIRE SPEED &
AMP PARAMETERS
(SKY-MIG 453K, SKY-MIG 553S)
Selecting the value of Wire Speed or Amp
parameters.
To select regulation and to display the Wire Speed
and Amp parameters follow these simple instructions:
-
Switch OFF the machine
-
Switch ON the machine at the same time
holding the INCH button (9)
-
Hold the INCH button (9) for approximately
2secs. Wire Speed parameter will appear in
display (6)
-
Regulate chosen Wire Speed using
potentiometer (17)
-
To display and regulate Amps use the same
instructions until Amp parameter appears in
display (6)
When switching the machine OFF and then ON, last
parameter setting is stored
Summary of Contents for SKY-MIG 353K
