email: info@stellarlighting.co.uk
3
MK-C6W2 light engine with fibre optic fibre bundle
User manual
Light engine and remote controller dimensions
Connection method between optical fibres and the light engine
Your fibre optic bundle will come with the
connector fittings ready to connect to the
light engine. However, if you need to adjust
your bundl
follow the steps below.
1.
Align all the optical fibre ends and fasten with tapes which can resist temperature over 130
℃
2.
Pass the fibres through the connector and fasten the rotary tensioner until the fibres are tightened.
3.
Cut the fibre bundle to a flat surface with a heat-knife or blade.
