email: info@stellarlighting.co.uk
5
MK-C6W2 light engine with fibre optic fibre bundle
User manual
Pairing the remote controller
Pairing
the light engine. However, in some cases the remote controller can unpair from the light engine. In these
scenarios, follow these steps:
Press th
-
e light will blink 3
times to indicate that the remote control is paired.
Unpairing
Press the
+ button once within 3 seconds of switching the light engine on. The light will blink 6
times if unpairing was successful.
Troubleshooting for remote controller connection issues:
•
•
Check if the battery is operational in the remote controller: Press a button on the remote and the
the remote or the battery needs replacing.
•
indicator light on the back of the
light engine flashes up, when a button is pressed on the remote. If the indicator light is not flashing up,
the remote controller might be unpaired from the light engine. To pair the devices, press the
-
tton once, within 3 seconds of switching the light engine on. The light will blink 3
times to indicate that the remote control is paired.
•
controller, restart the device and test again.
•
